Automatic gates can provide an extra bit of security for a commercial or residential property. And you need to frequently hire professionals for gate repair service Philadelphia as they need to be looked after regularly to work smoothly. Not only does a sliding gate offer peace of mind and security, but it also gives you the convenience of opening and closing the gate remotely. However, you have to look out for some common mechanical gate problems, and if you see one, make sure to call professionals immediately.
Following are the five most common automatic gate problems:
Sometimes, an automatic gate can bring about a massive amount of noise when opening and closing. There could be many reasons behind it that don’t always seem immediately apparent. Often, the noise occurs because the mechanism which moves the gates is worn out. You can fix this automatic gate problem by taking it apart and then reassembling the mechanism or having a new part fitted.
Gate Won’t Open Or Close
That usually occurs due to a power outage. Automatic gates require a constant supply of electricity to operate correctly. Power outages and failures will prevent your automatic gate from working. If your gate is not opening or closing, you should check whether there is a power outage. If there is no power outage or any other electrical problem, test your automatic gate manually to identify any operational issues. Hire the help of a professional for Residential Railing gate Philadelphia if you cannot identify the cause of the problem.
Faulty Remote Control
A malfunctioning remote control is another typical automatic gate problem. You should keep the remote control in good working condition if you want to open and close your electric gate without any issues. Often, the batteries of the remote control start to fade now and then. Therefore, check and replace its batteries and try again. If the problem is still there, then replacing the remote is the only solution.
Sliding gates have become an essential part of every property, and they need regular Residential Railing gate Philadelphia to work smoothly. Automatic gates work by using sensors that trigger motion. However, it will certainly fail to open if the sensors are blocked. Insects and vermin can also climb into the dark spaces provided by the entrance, causing an obstruction. Make sure that such areas are kept clear of dirt and pests so that the sensors work perfectly at all times. Moss and mold can cause such obstruction, so you should keep an eye out for those as well.
Stuck In Manual Mode
Sometimes, the gate can get stuck in manual mode and won’t open or close automatically. There could be a problem with the batteries in the remote or with the gate’s opening mechanism. Sometimes, you’ll need to call experts for a Gate Repair Service Philadelphia service, but sometimes you can look out for the problem yourself. However, you should check both of these problems to figure out why the gate is not working in manual mode.